Samsung galaxy grand prime SM-G531BT stock rom v5.1.1 Lollipop
Here you can download official Samsung galaxy grand prime SM-G531BT stock rom on your PC drive. Usually, the Samsung SM-G531BT stock rom is in a .zip file package. Thus you need a software like WinRar, B1 Free Archiver, WinZip etc. to extract the firmware file. It is an official stock rom and does not void the warranty of your Samsung device. So, don’t worry about the warranty. It is legally launched by the Samsung Electronics to help in recovering the Samsung galaxy grand prime SM-G531BT device when it got boot-loop, software error, up-date malfunction, standing together with a useless problem.
FIRMWARE DOWNLOAD LINKS
How to install Samsung SM-G531BT stock rom
Before flashing the Samsung galaxy grand prime SM-G531BT stock rom:
➨ Battery must be charged more than 30%.
➨ Install Samsung USB Drivers on Windows PC.
 Boot your Samsung device into “Download Mode“:
- Switch off your Samsung Device.
- Press ” Volume Down + Home + Power ” buttons together, hold for 5-8 seconds, a Warning message will appear on the device screen.
- Press Volume-Up to accept the Warning Message and device will start in Download Mode.
 Download and extract the file of Samsung galaxy grand prime SM-G531BT stock rom and get the flashable .tar.md5 file by extracting it.
 Next, download and Run the Odin.exe (Samsung Flashing Tool) on PC and Connect the device via USB cable to the PC. The Odin detects the Samsung device and shows an “ID:0/***> Added!!” text in the message box.
 Click on AP button in the Odin window, then pick the .tar.md5 file from the extracted folder of firmware as already extracted in the step .
 Click on the “ Start button ” at the Odin window (it will start installing the Samsung SM-G531BT stock rom ) and wait till ends the process. You’ll see a “PASS!” text message in green Colour. Congratulations!, you have successfully flashed your Samsung galaxy grand prime SM-G531BT.
 Finally, the device will automatically reboot after full Odin process. Now disconnect your device from PC and wait about 10 minutes that the device starts perfectly after installation of Samsung SM-G531BT stock rom.
Fix Bootloop after Installing Samsung SM-G531BT stock rom
Occasionally, after flashing the Samsung galaxy grand prime SM-G531BT stock rom, it might do not boot. If the Samsung device stuck on boot animation for more than 10 minutes then follow these instructions:
- Visit Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
- In Recovery Mode use the Volume keys to navigate between options and Power key to choose an option.
- Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task then tap Reboot option.
Read it Carefully!
This firmware is released just to the Samsung galaxy grand prime SM-G531BT. So that, don’t try this firmware on any other Android device. Moreover, we are not responsible if anything wrong happens to your device during or after installation of Samsung SM-G531BT stock rom through this guide. Try this at your own risk, however, we believe that should you follow the instructions carefully that mentioned in this guide; your device shouldn’t face any issue.
Consequently, before flashing the Samsung galaxy grand prime SM-G531BT stock rom, don’t forget to Take a Backup. Especially Contacts, SMS, Call History and Media. So that, all kind of data will be removed after flashing the Samsung galaxy grand prime SM-G531BT stock rom.
Furthermore, above all product names, logos, and brands are the property of their respective owners. Above all company, product and service names used on this Blog are for identification and learning purposes only.